Scaffolding Course 2-9 Meters – Requirements, Training, and Certification

Scaffolding Course 2-9 meters is mandatory training for anyone who will erect, alter, or dismantle scaffolding with a height of 2 to 9 meters. Scaffold erection is high-risk work, and proper training is crucial for safety at the construction site. In this guide, you will find everything you need to know about the scaffolding course 2-9m, including legal requirements, course content, theoretical and practical requirements, and the possibility of taking the theoretical part online.

Difference between scaffolding 2-5 meters, 2-9 meters, and over 9 meters

Norwegian regulations operate with different competency requirements depending on the height of the scaffolding:

• Scaffolding up to 2 meters – Requires user course scaffolding and basic training.
• Scaffolding 2–5 meters – Requires documented training in erection with a minimum of 7.5 hours of theory and practical exercise.
• Scaffolding 2–9 meters – Requires more extensive training with a minimum of 15 hours of theory and practical exercise. This also covers scaffolding 2–5 meters.
• Scaffolding over 9 meters – Requires a trade certificate as a scaffolder or equivalent competence.

By taking the scaffolding course 2-9 meters, you gain competence to erect, alter, and dismantle scaffolding up to 9 meters in height, which covers most needs on Norwegian construction sites.

Legal requirements: Regulation on the Performance of Work §§17-3 and 17-4

The training requirements for scaffolders are regulated in the Regulation on the Performance of Work:

• §17-3 – Requires that workers who erect, dismantle, or alter scaffolding must have documented training.
• §17-4 – Specifies the requirements for the content and scope of the training, depending on the height and complexity of the scaffolding.

For scaffolding between 2 and 9 meters, a minimum of 15 hours of theoretical training combined with practical exercise in erecting, altering, and dismantling the relevant scaffolding system is required.

Theory (15 hours) + practical requirement

Scaffolding course 2-9m consists of two main parts:

Theoretical training – minimum 15 hours

The theoretical part can be conducted as classroom instruction or online. It covers everything from regulations to practical knowledge of scaffold erection.

Practical training

The practical part must be carried out physically with the relevant scaffolding system. Here you get hands-on experience with erection, securing, altering, and dismantling. Practical training can be organized by the employer or in cooperation with the scaffolding manufacturer/supplier.

Detailed course content

The theoretical part of the scaffolding course covers the following topics:

• Regulations and provisions – Working Environment Act, Regulation on the Performance of Work, Client Regulations
• Planning – Assembly instructions, working drawings, anchoring plan
• Scaffolding types – Frame, system, and tube scaffolding
• Erection procedures – Step-by-step erection and dismantling
• Anchoring and bracing – Requirements for anchoring to walls or structures
• Fall protection during erection – Use of personal fall protection equipment, see also our fall protection course
• Load and stability – Permitted load, wind loads, safety margins
• Inspection and control – Inspection before use, after special events, and periodically
• Risk assessment – Hazard identification and safe job analysis (SJA)
• Protective equipment – Helmet, harness, gloves, and other necessary equipment

Online theory – how does it work?

Komplett HMS offers the theoretical part of the scaffolding course online. This is how it works:

1. Order the course on our website
2. Get immediate access to the learning platform
3. Complete 15 hours of theory at your own pace on mobile, tablet, or PC
4. Pass the final knowledge test
5. Download your course certificate for the theoretical part immediately
6. Then complete practical training at the workplace

The course is available in Norwegian, English, Polish, Lithuanian, Romanian, and several other languages, making it easy for employers with multilingual teams.

Certification and course certificate

After passing the theoretical knowledge test, you will receive a course certificate documenting your competence. To have complete documentation, you need:

• Course certificate for theory – 15 hours of theoretical training (obtained after passing the online course)
• Documentation of practical training – Performed with the relevant scaffolding system

The employer must retain the documentation and be able to present it during inspections by the Norwegian Labour Inspection Authority. The online scaffolding course from Komplett HMS provides you with the theoretical part of the competence requirement in a flexible and efficient way.

Frequently asked questions about scaffolding course 2-9 meters

Can I take the entire scaffolding course online?

You can take the theoretical part (15 hours) online. The practical part must be completed physically with the relevant scaffolding system.

Does the scaffolding course 2-9m also cover scaffolding under 5 meters?

Yes, the course for 2-9 meters covers the entire range from 2 to 9 meters, so you do not need a separate course for scaffolding 2-5 meters in addition.

What if the scaffolding is over 9 meters?

For scaffolding over 9 meters, a trade certificate as a scaffolder or equivalent competence is required. The scaffolding course 2-9m is not sufficient for higher scaffolding.

Who needs a scaffolding course?

Anyone who will erect, alter, or dismantle scaffolding between 2 and 9 meters must have documented training. Those who only use pre-erected scaffolding need a user course scaffolding instead.

Can I take the course in multiple languages?

Yes, Komplett HMS offers the scaffolding course in Norwegian, English, Polish, Lithuanian, Romanian, and several other languages.

How long is the course certificate valid?

There is no fixed expiry date for the course certificate in Norwegian regulations. The employer must assess the need for refresher courses in the event of changes in equipment, work procedures, or regulations.