Work on or near public roads requires the appropriate role, training, and planning. “Work notification course” is often used as a general term, but the correct course depends on what the person will actually be doing. The Norwegian Public Roads Administration’s course and competency portal distinguishes between courses 0, 1, 2, and 3.
It is important to use the current course structure. Older articles often refer only to Courses 1, 2, and 3, or describe the roles in a way that no longer corresponds to the current portal. This guide has been updated to reflect the current structure.
Work Notification Courses 0, 1, 2, and 3
| Course | Role in the current course portal | Typical needs |
|---|---|---|
| Course 0 | Introductory Level | For individuals who need a basic understanding during a short-term or limited-duration stay. Always confirm the need with the employer or road owner. |
| Course 1 | Site Manager | For anyone who will serve as the site manager at the workplace. |
| Course 2 | Person in Charge | For the person who will serve as the designated representative for the work notification. |
| Course 3 | Manual traffic control | For people who will be directing traffic manually. |
The names and requirements must always be verified on the Norwegian Public Roads Administration’s course and competency portal. The road owner, the contract, and the specific work assignment may impose additional requirements.
Who needs the workplace safety training course 1?
Course 1 pertains to the role of site manager. The employer must determine who will assume this role and ensure that the person has the appropriate and valid qualifications before work begins. The course should not be chosen simply because it was previously referred to as a general “basic course.”
See the Work Notification Course 1 and the current price
Who needs the workplace safety training course 2?
Course 2 pertains to the role of the person in charge. This is a different role from that of the site manager. The organization must clarify the division of responsibilities, the competency requirements, and the documentation required for the specific assignment.
See the Work Notification Course 2 and the current price
When is Course 3 required?
Course 3 covers manual traffic control. It should not be confused with planning or a supervisory role. If an employee is to control traffic manually, the employer must verify which course and practical training requirements apply before the task is performed.
Work Notification and Manual N301
The training must be viewed in the context of applicable regulations, requirements set by the road owner, and the Norwegian Public Roads Administration’s Handbook N301 on work on and near roads. A course certificate is one part of the required qualifications; the company must also ensure that work notifications are planned, approved when required, properly established, and followed up on-site.
Can the occupational safety and health course be taken as an online course or through self-study?
Theory courses can be offered digitally when the course curriculum allows for it. However, online courses alone do not exempt the employer from evaluating the role, experience, on-site training, or other requirements. Always verify that the course is relevant to the specific role and that the documentation is accepted for the assignment.
How a Company Chooses the Right Course
- Describe the work task and the road network to which the work applies.
- Determine who will be the site manager and who will be in charge.
- Consider whether someone should direct traffic manually.
- Check the current requirements on the course portal and with the road authority.
- Sign up for the right course and document your completion of it.
- Ensure that local planning, training, and follow-up are in place before starting operations.
Common Mistakes
- Choosing a course based on an old course name without checking its current role.
- To believe that Course 3 is about planning; the current term is manual traffic control.
- Assuming that course certificates alone satisfy the requirements of the work notification plan and local regulations.
- Sending all employees to the same training course even though they have different roles.
Frequently Asked Questions
What is the difference between Workplace Safety Courses 1 and 2?
Course 1 is intended for site managers, while Course 2 is intended for supervisors. The specific role required is determined by the nature of the work and the requirements of the road owner or client.
How much does the Workplace Safety Course 2 cost?
Prices are subject to change. Use the product link above to view the current price and contents before placing your order.
How long is the workplace safety training course valid?
Validity and any renewal requirements must be verified in the current course regulations and on the course certificate. Requirements are subject to change, and the client or road owner may require updated documentation.
Is the "Work Notification Course 3" a course in planning?
No. In the current course portal, Course 3 covers manual traffic control. The role of person in charge is covered in Course 2.
Last updated on August 15, 2026, based on information from the Norwegian Public Roads Administration’s training and skills portal. Always check the latest requirements before starting work.
Would you like to take a workplace safety course?
See the price and the most important information you need to know all on one page.
Simple: Select the quantity, add it to your cart, and check out. If you need help, give us a call.